Channel Block Set, slot filler kit with rest button, flush mount screws and 3 hole plate * Not applicable to BuildPro® MAX table.

Slot Filler Kit

P/N: T50930


Use the Channel Block and Rest Button when a flat, continuous support surface is required directly over the 1.7" table slots.

Place the 3-hole Channel Block beneath BuildPro® plates, aligning with plate holes, and mount with Flush Mount Socket Head Shoulder Screws (included).

Place the Rest Button in the center hole of the Channel Block to provide a rigid work surface level with the tabletop.

The 5/8" shank on the Rest Button slip fits into the Channel Block holes. To elevate a workpiece above the tabletop surface, place multiple Rest Buttons directly into the ∅5/8" holes on the BuildPro® plate.

Part No. Description Weight (lb) CAD
T50930 2.4 IGS
Rest Button is going to be placed into the Channel Block in order to fill in the table slot
The Slot Filler Kit provides a solid work surface directly over the 1.7" slots in the BuildPro® Table.
insert the Rest Button into the center hole of the Channel Block to create a continuous work surface.
After mounting the Rest Button and Channel Block, the "filled" channel is level with the BuildPro® Table.

Channel Block

Part No. Dimension (in) Hole Dia. (in) Weight (lb) CAD
T51003 6.3 x 1.6 x 0.63 5/8 0.6 STEP
Slot Filler Kit illustration