PATENTED buildpro tables
View information on the BuildPro® METRIC Table System
* Please note: Only the inch based version is available in North America.

BuildPro® System

All BuildPro® tables are PATENTED

All BuildPro® Tables are constructed from 5/8 thick steel plate, with ∅5/8 CNC machined and holes chamfered in a 2" grid pattern. All tables, except the BuildPro® MAX series, have 1.7" slots between plates.

Place a BuildPro® Table in your shop, and you will discover how modular fixturing will benefit your operation in greater productivity and improved work quality. Enjoy fast setup replication and reduced project lead times in prototyping, short production runs, or dedicated volume production runs.


BuildPro Table Accuracy:
  • Table flatness : 0.012" / 3 feet
  • Hole diameter : 0.625" + 0.002 -.000
  • Hole spacing : 2.000" ± 0.0015
  • Plate thickness : 0.630" ±0.004
patented
Illustration of how to install patented reversible plate

NEW REVERSIBLE SELF-LOCATING TABLE PLATES!

Get longer wear from your BuildPro® Table. When the surface of your BuildPro® Table plates show signs of wear, turn them over to provide a new work surface.

Mounting Screws and Locating Bushings may also be purchased separately. Installing patented reversible plate Flipping over the new reversible plate
Precision ground steel plates, with CNC machined Ø5/8 in holes in a 2in  grid pattern for locating, positioning and mounting BuildPro clamps and accessories.

Precision ground steel plates, with CNC machined ∅5/8" holes in a 2" grid pattern for locating, positioning and mounting BuildPro® clamps and accessories.

Plates can be reconfigured to expand the width of the table for larger projects.

Plates can be reconfigured to expand the width of the table for larger projects.

Heavy Duty Leveling Feet ensure proper leveling of the table on uneven surfaces.

Heavy Duty Leveling Feet ensure proper leveling of the table on uneven surfaces.


Standard / plain finish tables
Nitrided / heat-treated tables
New design ball lock bolts are the essential component in modular fixturing.

* NEW DESIGN:
Ball Lock Bolt - An essential component in Modular Fixturing!

View Demo Video


Finger tighten the knurled head after insertion to preload before tightening with Hex Key.

Finger tighten the knurled head after insertion to preload before tightening with Hex Key.


Three locking steel balls move outward to lock the bolt in position.

Three locking steel balls move outward to lock the bolt in position.

KEY ELEMENTS in the BuildPro® Modular Fixturing System


Ball Lock Bolts are key to the efficient set up of Modular Fixtures on your BuildPro® Tabletop. Use the Ball Lock Bolts to fasten clamping elements to the BuildPro® Tabletop, or fasten two clamping elements together.
Basic Hold Down Clamping:
Stop, Position, & Locate Stock:
Quick hold-down clamping of flat, square, angled or round parts.

Clamps

Quick hold-down clamping of flat, square, angled or round parts.

Stop, locate, and position parts.

Locate / Stop

Stop, locate, and position parts.

Elevate and hold round parts.

Support Round Stock

Elevate and hold round parts.

Stack Right Angle Brackets to elevate and hold round parts.

Stop / Locate / Elevate

Stop and locate parts.

Stack Right Angle Brackets to elevate and hold round parts.