Good Hand Toggle Clamp GH-12050

Toggle Clamps

P/N: GH-12050

PRODUCT DESCRIPTION:

Mount any of the seven Good Hand® Toggle Clamps on this low-profile, pre-tapped Adjustable Mounting Base. Mount Toggle Clamps directly on the BuildPro Tabletop, Riser Blocks or Econo Stop & Clamping Squares, for the height and reach required for each hold down application.

See the full selection of Vertical, Horizontal, Push / Pull, and Latch Type Toggle Clamps HERE.

Toggle Clamp Vertical type illustration

Vertical

Toggle Clamp Horizontal type illustration

Horizontal


Part No. Description Mounting Hole (in) A (in) B (in) C (in) D (in) E (in) Weight (lb)
GH-12050 Vertical 4 x Ø.20 0.89 1.3 0.38 3.74 1 0.4
GH-12050-HB 4 x Ø.20 1.66 1.3 0.38 4.80 1 0.4
GH-12130 4 x Ø.28 1.25 2.8 0.63 5.5 1.4 0.8
GH-12130-HB 4 x Ø.28 2.25 2.8 0.63 6.5 1.4 0.9
GH-12265 4 x Ø.34 1.75 3.3 0.8 7.5 1.9 1.4
GH-225-D Horizontal 4 x Ø.26 1.37 2.8 0.5 6.8 1.5 0.6
GH-225-DHB 4 x Ø.26 2.13 2.8 0.5 6.6 1.5 0.6
Toggle Clamps application directly mounted on the table using Flush Mount Ball Lock Bolt
Directly mounted on the table using Flush Mount Ball Lock Bolt.
Toggle Clamps Mounted with Straight Edge Stop attachment and Ball Lock Bolts
Mounted with Straight Edge Stop attachment and Ball Lock Bolts (not included).
use Ball Lock Bolts to mount the Straight Edge Stop attachment on the Riser Block
Use Ball Lock Bolts (not included), to mount the Straight Edge Stop attachment on the Riser Block.

Adjustable Mounting Base

The thickness of the Aluminum base adds 5/8" to the maximum capacity of the Toggle Clamp.

Toggle Clamp Base Plate T50505GH-01

T50505GH-01

Toggle Clamp Base Plate T50505GH-01 drawing
Toggle Clamp Base Plate T50505GH

T50505GH

Toggle Clamp Base Plate T50505GH drawing
Part No. Description Weight (lb)
T50505GH-01 Pre-tapped Alum. Base ONLY. 0.3
T50505GH Includes: pre-tapped Alum. Base + Straight Edge Stop + Flush Mount Screw. 0.7