Inserta Clamps with T Handle View Demo Video

Inserta Clamps - T Handle

P/N: UDN5150 / UEN5200


Place the Inserta Clamps into the ∅5/8" holes on the BuildPro® Tabletop, Riser Blocks, or Economy Stops and Clamping Squares for fast, easy clamping. Clamp in the vertical or horizontal position at any height.

Clip the optional Top V-Pads onto the top spindle to clamp round or angled stock. Remove the clamp arm by depressing the spring stop, and slide the Sidekick attachment onto the clamp bar, followed by the clamp arm, for two point horizontal and vertical clamping force.

Part No. Clamping Capacity (in) Throat Depth (in) Clamping Pressure (lb) Rail Size (in) Weight (lb) CAD
UDN5150 6-1/2 3-1/4 300 5/8 x 5/16 1.2 IGS | STEP
UEN5200 8-1/2 4 400 25/32 x 3/8 2.2 IGS | STEP
UERN5200 8-1/2 4 400 25/32 x 3/8 2.2 --
Inserta Clamps with ratchet handles clamp down square tubes on the table

Insert Clamps can be inserted into any hole on the BuildPro® Tabletop for instant clamping wherever needed.

Inserta Clamps with magnetic top v-pad clamp down a round rube.

In this application, the Inserta Clamp is used with Aluminum Magnetic Top V-Pads to hold a round tube.

Inserta Clamp on the riser block used horizontally to clamp down a square tube

Inserta Clamps can be used in any orientation.

Clamp Accessories

Add the optional top V-pad onto the swivel pad to hold round, square, flat, and angled stock.

View Demo Video of Inserta Clamp with Magnetic V-Pad
Optional Top V Pads
Part No. Material For Inserta Clamps Weight (lb)
T54217 Aluminum UDN5150 & UDWN5150 0.05
T54219 UEN5200 0.05
XDA2 Steel UDN5150 & UDWN5150 0.2
XFA2 UEN5200 & UEWN5200 0.4
XDA2S Stainless Steel UDN5150 & UDWN5150 0.2
XFA2S UEN5200 & UEWN5200 0.4
Inserta Clamp with Optional Top V Pad

Slide the Sidekick onto the clamp rail of Inserta Clamps for horizontal clamping force. More Details »

Part No. For Inserta Clamps Stroke (in) Weight (lb)
XDS UDN5150 1 0.6